View 61-12300_1770991.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

switches and indicators 61 6 1
switches and indicators 108 01.2000 series 61 description product assembly product range - pushbuttons for standard mounting - pushbuttons for flush mounting - asseccories / spare parts technical data technical drawing / dimension / layouts circuit drawing typical applications marking page 109 page 110 page 137 page 140 page 150 page 151 page 153 page 111 page 117 page 123 index
description 61 109 01.2000 6 1 general notes the indicators, illuminated pushbuttons, selector switches, keylock switches and emergency stop switches with spray-water protection at the front (ip 65) are modular and consist of an actuator and switching element. in addition to the standard switching elements (gold-plated silver contact with universal soldering or plug-in terminals), forced- opening, slow-make switching elements with gold or silver contacts and soldering or plug-in terminals are available. they can be supplied with screw terminals and silver contacts too. the front dimensions of the units in this series are 24 x 24 mm, 24 mm dia., 18 x 24 mm, 18 x 18 mm or 18 mm dia. for flush mounting the dimensions 25 mm dia., 24 x 30 mm and 24 x 24 mm can be supplied. mounting all switch actuators are mounted from the front by pushing them through the mounting hole in the front panel. they are then fixed from the back with a fixing nut and the mounting tool typ no. 01-907. max. tightening torque 50 ncm. for mounting dimensions and grid size see as of page 145. the preassembled switching element with the connecting wires in a single plane can be clipped on afterwards. for block or series mount- ing aids are available. for switching elements with 2.8 mm plug-in terminals, we offer plug- in bases, which when soldered to a pcb enable a plug-in connection to the button. all actuators are provided with an anti-rotation device. lenses the flat or concave lenses are available in various colours and a transparent or translucent version. the lens surface is non-reflecting (matt). lenses 19.7 mm dia. can be supplied also in aluminium. marking for engraving, hot stamping and film inserts, see page 153 under marking. illumination the midget-grooved t 1 3/4 incandescent lamp (6-60 v, 1.2 w) en- sures perfect illumination of the lenses, which are supplied in various colours. midget-grooved t 1 3/4 multi-led (6, 12, 24, 48 v) are also available in white, red, yellow and green. for supply voltages above 60 v, it is necessary to use a voltage re- duction element (external series resistor, capacitor or transformer). do not solder the terminals directly, bacause of the high surface tem- perature. position indication when the switch with maintained action is actuated, the lens snaps into place mechanically. the position of contacts can always be de- termined by the position of the lens. keylock switch standard lock (index d) 1 standard number 311. if the lock number is not specified, we will supply no. 311. an additional 134 special locks (index x) are availa- ble on request. master keys for locks no. 311 - 445 may be ordered by quoting no. 31-989.300. two keys are supplied with each keylock switch. spare keys for dom standard locks may be ordered by quoting no. 31-989 (please state the lock number). emergency stop switch foolproof with key to unlock kaba safety lock. standard lock number is 1001. locks with other numbers are available on request. spare keys for kaba locks may be ordered under no. 14-987 (please state the lock number). specimen order indicator complete - indicator complete, soldering terminal, 18 x 24 mm 61-0030.02 recommended accessories: - lens plastic, 18 x 24 mm, clear 61-9331.7 - led, 6 chips, 6 vdc, yellow 10-5306.3254
product assembly 61 110 01.2000 illuminated-/pushbutton 1 lens 2 actuator case 3 fixing nut 4 switching element illuminated-/pushbutton for flush mounting 1 lens 2 acutator housing 3 front bezel 4 sealing 5 front panel 6 fixing bow 7 fixing nut 8 switching element
pushbuttons for standard mounting 61 111 01.2000 6 1 recommended accessories: d lens plastic ? 123 d front ring ? 126 d incandescent lamp ? 132; led ? 133 connection method: st/pt = soldering-/plug-in terminal accessorie front ring only requested for ? 24 mm. marking see page 153 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 recommended accessories: d lens plastic ? 123 d front ring ? 126 d incandescent lamp ? 132; led ? 133 d lamp element ? 128; diode element ? 128; flasher element ? 131 accessorie front ring only requested for ? 24 mm. marking see page 153 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 indicator complete connection method a 18 x 24 mm part no. b 24 x 24 mm part no. 18 mm dia. part no. b 18 x 18 mm part no. 24 mm dia. part no. circuit drawing technical drawing mounting dimension e indicator complete st/pt 61-0030.02 61-0050.02 61-0010.02 61-0020.02 61-0040.02 1 1 1 0,005 indicator-/flasher-actuator a 18 x 24 mm part no. b 24 x 24 mm part no. 18 mm dia. part no. b 18 x 18 mm part no. 24 mm dia. part no. circuit drawing technical drawing mounting dimension e indicator-/flasher-actuator 61-0039.0 61-0059.0 61-0019.0 61-0029.0 61-0049.0 1 2 1 0,005
pushbuttons for standard mounting 61 112 01.2000 recommended accessories: d lens plastic ? 123; lens metal with window ? 124; lens metal ? 124 d front ring ? 126 d incandescent lamp ? 132; led ? 133 d switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions ? 129 switching action: main = maintained action, mom = momentary action, mom/main = momentary-/maintained action accessorie front ring only requested for ? 24 mm. marking see page 153 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 according to en 418 recommended accessories: d label for emergency stop switch ? 134 d switching element for emergency stop switch ? 130 d protective shroud for emergency stop switch ? 134 switching action: main = maintained action description see page 109 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 illuminated-/pushbutton actuator switching action a 18 x 24 mm part no. b 24 x 24 mm part no. 18 mm dia. part no. b 18 x 18 mm part no. 24 mm dia. part no. circuit drawing technical drawing mounting dimension e illuminated-/pushbutton actuator main 61-1230.0 61-1250.0 61-1210.0 61-1220.0 61-1240.0 2 3 1 0,005 mom 61-1130.0 61-1150.0 61-1110.0 61-1120.0 61-1140.0 3 3 1 0,005 mom/main 61-1330.0 61-1350.0 61-1310.0 61-1320.0 3 3 1 0,005 emergency stop switch actuator foolproof switching action unlocking marking of mushroom-head cap 27 mm dia. part no. circuit drawing technical drawing mounting dimension e emergency stop switch actuator foolproof main twist to release arrows 61-3440.4/1 4 4 2 0,003 stop 61-3440.4/2 4 4 2 0,003 without label standard lock1001, other lock numbers on re- quest main key to release stop 61-5441.4/k 4 4 2 0,038
pushbuttons for standard mounting 61 113 01.2000 6 1 recommended accessories: d mushroom-head cap ? 124 d front ring ? 126 d switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions ? 129 switching action: main = maintained action, mom = momentary action technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 if installed with anti-twist device, the lug is on the left. recommended accessories: d keylock front bezel ? 124 d switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions ? 129 d anti-twisting ring ? 135 switching action: main = maintained action, mom = momentary action description see page 109 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 pushbutton actuator with mushroom-head cap switching action 32 mm dia. part no. circuit drawing technical drawing mounting dimension e pushbutton actuator with mushroom-head cap main 61-1240.0 2 5 2 0,006 mom 61-1140.0 3 5 2 0,006 keylock switch actuator 2 positions switching action key removable in part no. circuit drawing technical drawing mounting dimension e keylock switch actuator 2 positions pos. a: basic position pos. c: maintained action standard lock 311, other lock numbers on request main a 61-2201.0/d 6 6 1 0,003 c 61-2203.0/d 6 6 1 0,003 c+a 61-2205.0/d 6 6 1 0,003 pos. a: basic position pos. c: momentary action standard lock 311, other lock numbers on request mom a 61-2101.0/d 5 6 1 0,003 maint. 90? c mom. 42? c aa
pushbuttons for standard mounting 61 114 01.2000 if installed with anti-twist device, the lug is on the left. recommended accessories: d keylock front bezel ? 124 d switching element for keylock-/selector switch 3 positions ? 130 d anti-twisting ring ? 135 switching action: mom = momentary action, main = maintained action, 0 = basic position description see page 109 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 keylock switch actuator 3 positions switching action key removable in part no. circuit drawing technical drawing mounting dimension e keylock switch actuator 3 positions pos. c: maintained action pos. a: basic position pos. b: maintained action standard lock 311 other lock numbers on request main-0-main a 61-2601.0/d 11 6 1 0,003 a+b 61-2604.0/d 11 6 1 0,003 b 61-2602.0/d 11 6 1 0,003 c 61-2603.0/d 11 6 1 0,003 c+a 61-2605.0/d 11 6 1 0,003 c+a+b 61-2607.0/d 11 6 1 0,003 c+b 61-2606.0/d 11 6 1 0,003 pos. c: maintained action pos. a: basic position pos. b: momentary action standard lock 311 other lock numbers on request main-0-mom a 61-2701.0/d 10 6 1 0,003 c 61-2703.0/d 10 6 1 0,003 c+a 61-2705.0/d 10 6 1 0,003 pos. c: momentary action pos. a: basic position pos. b: maintained action standard lock 311 mom-0-main a 61-2801.0/d 9 6 1 0,003 a+b 61-2804.0/d 9 6 1 0,003 b 61-2802.0/d 7 6 1 0,003 pos. c: momentary action pos. a: basic position pos. b: momentary action standard lock 311 mom-0-mom a 61-2501.0/d 8 6 1 0,003 maint. 90? cb mom. 42? cb aa
pushbuttons for standard mounting 61 115 01.2000 6 1 if installed with anti-twist device, the lug is on the left. recommended accessories: d lever ? 125 d incandescent lamp ? 132; led ? 133 d switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions ? 129 d anti-twisting ring ? 135 switching action: main = maintained action, mom = momentary action technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 selector switch actuator 2 positions switching action 18 mm dia. part no. circuit drawing technical drawing mounting dimension e selector switch actuator 2 positions pos. c: maintained action pos. a: basic position main 61-4210.0 13 7 1 0,006 pos. c: momentary action pos. a: basic position mom 61-4110.0 12 7 1 0,006 maint. 90? c mom. 42? c aa
pushbuttons for standard mounting 61 116 01.2000 if installed with anti-twist device, the lug is on the left. recommended accessories: d lever ? 125 d incandescent lamp ? 132; led ? 133 d switching element for keylock-/selector switch 3 positions ? 130 d anti-twisting ring ? 135 switching action: mom = momentary, main = maintaining, 0 = basic position technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 selector switch actuator 3 positions switching action 18 mm dia. part no. circuit drawing technical drawing mounting dimension e selector switch actuator 3 positions pos. c: maintained action pos. a: basic position pos. b: maintained action main-0-main 61-4610.0 17 7 1 0,006 pos. c: maintained action pos. a: basic position pos. b: momentary action main-0-mom 61-4710.0 16 7 1 0,006 pos. c: momentary action pos. a: basic position pos. b: maintained action mom-0-main 61-4810.0 15 7 1 0,006 pos. c: momentary action pos. a: basic position pos. b: momentary action mom-0-mom 61-4510.0 14 7 1 0,006 maint. 90? cb mom. 42? cb aa
pushbuttons for flush mounting 61 117 01.2000 6 1 recommended accessories: d lens plastic for flush mounting ? 124 d front bezel-set for flush mounting ? 126 d incandescent lamp ? 132; led ? 133 connection method: st/pt = soldering-/plug-in terminal marking see page 153 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 recommended accessories: d lens plastic for flush mounting ? 124 d front bezel-set for flush mounting ? 126 d incandescent lamp ? 132; led ? 133 d lamp element ? 128; diode element ? 128; flasher element ? 131 marking see page 153 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 indicator complete for flush mounting connection method part no. circuit drawing technical drawing mounting dimension e indicator complete for flush mounting st/pt 61-0000.02 1 8 3 0,006 indicator-/flasher-actuator for flush mounting part no. circuit drawing technical drawing mounting dimension e indicator-/flasher-actuator for flush mounting 61-0009.0 1 9 3 0,005
pushbuttons for flush mounting 61 118 01.2000 recommended accessories: d lens plastic for flush mounting ? 124; lens metal with window ? 124; lens metal ? 124 d front bezel-set for flush mounting ? 126 d incandescent lamp ? 132; led ? 133 d switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions ? 129 switching action: main = maintained action, mom = momentary action, mom/main = momentary-/maintained action marking see page 153 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 recommended accessories: d mushroom-head cap ? 124 d front bezel-set round for flush mounting ? 126 d switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions ? 129 switching action: main = maintained action, mom = momentary action, mom/main = momentary-/maintained action technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 illuminated-/pushbutton actuator for flush mounting switching action part no. circuit drawing technical drawing mounting dimension e illuminated-/pushbutton actuator for flush mounting mom/main 61-1300.0 19 10 3 0,005 mom 61-1100.0 19 10 3 0,005 main 61-1200.0 18 10 3 0,005 mushroom pushbutton actuator for flush mounting , switching action part no. circuit drawing technical drawing mounting dimension e mushroom pushbutton actuator for flush mounting mom/main 61-1300.0 3 11 2 0,006 mom 61-1100.0 3 11 2 0,006 main 61-1200.0 2 11 2 0,006
pushbuttons for flush mounting 61 119 01.2000 6 1 recommended accessories: d keylock front bezel ? 124 d front bezel-set for flush mounting ? 126 d switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions ? 129 switching action: main = maintained action, mom = momentary action description see page 109 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 keylock switch actuator with 2 positions for flush mounting switching action key removable in part no. circuit drawing technical drawing mounting dimension e keylock switch actuator with 2 positions for flush mounting pos. a: basic position pos. c: maintained action standard lock 311, other lock numbers on request main a 61-2201.0/d 6 12 3 0,003 c 61-2203.0/d 6 12 3 0,003 c+a 61-2205.0/d 6 12 3 0,003 pos. a: basic position pos. c: momentary action standard lock 311, other lock numbers on request mom a 61-2101.0/d 5 12 3 0,003 maint. 90? c mom. 42? c aa
pushbuttons for flush mounting 61 120 01.2000 recommended accessories: d keylock front bezel ? 124 d front bezel-set for flush mounting ? 126 d switching element for keylock-/selector switch 3 positions ? 130 switching action: mom = momentary action, main = maintained action, 0 = basic position description see page 109 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 keylock switch actuator 3 positions for flush mounting switching action key removable in part no. circuit drawing technical drawing mounting dimension e keylock switch actuator 3 positions for flush mounting pos. c: maintained action pos. a: basic position pos. b: momentary action standard lock 311, other lock numbers on request main-0-mom a 61-2701.0/d 10 12 3 0,003 c 61-2703.0/d 5 12 3 0,003 c+a 61-2705.0/d 10 12 3 0,003 pos. c: maintained action pos. a: basic position pos. b: maintained action standard lock 311, other lock numbers on request main-0-main a 61-2601.0/d 11 12 3 0,003 a+b 61-2604.0/d 11 12 3 0,003 b 61-2602.0/d 11 12 3 0,003 c 61-2603.0/d 11 12 3 0,003 c+a 61-2605.0/d 11 12 3 0,003 c+a+b 61-2607.0/d 11 12 3 0,003 c+b 61-2606.0/d 11 12 3 0,003 pos. c: momentary action pos. a: basic position pos. b: maintained action standard lock 311, other lock numbers on request mom-0-main a 61-2801.0/d 9 12 3 0,003 a+b 61-2804.0/d 9 12 3 0,003 b 62-2802.0/d 9 12 3 0,003 pos. c: momentary action pos. a: basic position pos. b: momentary action standard lock 311, other lock numbers on request mom-0-mom a 61-2501.0/d 8 12 3 0,003 maint. 90? cb mom. 42? cb aa
pushbuttons for flush mounting 61 121 01.2000 6 1 recommended accessories: d lever for flush mounting ? 125 d front bezel-set for flush mounting ? 126 d incandescent lamp ? 132; led ? 133 d switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions ? 129 switching action: main = maintained action, mom = momentary action technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 selector switch actuator 2 positions for flush mounting switching action part no. circuit drawing technical drawing mounting dimension e selector switch actuator 2 positions for flush mounting pos. c: maintained action pos. a: basic position main 61-4210.0 13 13 3 0,006 pos. c: momentary action pos. a: basic position mom 61-4110.0 12 13 3 0,006 maint. 90? c mom. 42? c aa
pushbuttons for flush mounting 61 122 01.2000 recommended accessories: d lever for flush mounting ? 125 d front bezel-set for flush mounting ? 126 d incandescent lamp ? 132; led ? 133 d switching element for keylock-/selector switch 3 positions ? 130 switching action: mom = momentary, main = maintaining, 0 = basic position technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 selector switch actuator 3 positions for flush mounting switching action part no. circuit drawing technical drawing mounting dimension e selector switch actuator 3 positions for flush mounting pos. c: maintained action pos. a: basic position pos. b: maintained action main-0-main 61-4610.0 17 13 3 0,006 pos. c: maintained action pos. a: basic position pos. b: momentary action main-0-mom 61-4710.0 16 13 3 0,006 pos. c: momentary action pos. a: basic position pos. b: maintained action mom-0-main 61-4810.0 15 13 3 0,006 pos. c: momentary action pos. a: basic position pos. b: momentary action mom-0-mom 61-4510.0 14 13 3 0,006 maint. 90? cb mom. 42? cb aa
accessories 61 123 01.2000 6 1 at front lens plastic shape lens/sup- port colour a 18 x 24 mm part no. b 24 x 24 mm part no. 18 mm dia. part no. b 18 x 18 mm part no. 25 mm dia. part no. e lens plastic matt con- cave transpar- ent/trans- lucent blue 61-9336.6 61-9326.6 0,001 colour- less, clear 61-9336.7 61-9326.7 0,001 green 61-9336.5 61-9326.5 0,001 orange 61-9336.3 61-9326.3 0,001 red 61-9336.2 61-9326.2 0,001 yellow 61-9336.4 61-9326.4 0,001 flat transpar- ent/trans- lucent blue 61-9311.6 61-9321.6 0,001 61-9642.6 0,002 61-9331.6 61-9351.6 0,001 colour- less, clear 61-9331.7 61-9311.7 61-9321.7 0,001 61-9642.7 0,002 61-9351.7 0,001 green 61-9331.5 61-9351.5 61-9311.5 61-9321.5 0,001 61-9642.5 0,002 orange 61-9321.3 0,001 61-9642.3 0,002 61-9331.3 61-9351.3 61-9311.3 0,001 red 61-9321.2 0,001 61-9642.2 0,002 61-9331.2 61-9351.2 61-9311.2 0,001 smoked 61-9331.1 61-9311.1 0,001 61-9642.1 0,002 61-9351.1 61-9321.1 0,001 yellow 61-9642.4 0,002 61-9331.4 61-9351.4 61-9311.4 61-9321.4 0,001 matt (not for film in- sert and led) con- cave translu- cent/ translu- cent white 61-9236.9 61-9226.9 0,001 flat translu- cent/ translu- cent white 61-9231.9 61-9251.9 61-9211.9 61-9221.9 0,001 matt (not for film in- sert and illumina- tion) con- cave opaque/ translu- cent black 61-9236.0 61-9226.0 0,001 grey 61-9236.8 61-9226.8 0,001 flat opaque/ translu- cent black 61-9231.0 61-9251.0 61-9211.0 61-9221.0 0,001 grey 61-9231.8 61-9251.8 61-9211.8 61-9221.8 0,001
accessories 61 124 01.2000 for keylock switch actuator lens plastic for flush mounting shape lens/support colour a 24 x 30 mm part no. b 24 x 24 mm part no. 25 mm dia. part no. e lens plastic for flush mounting matt flat transparent/trans- lucent blue 61-9681.6 61-9671.6 61-9642.6 0,001 colourless, clear 61-9681.7 61-9671.7 61-9642.7 0,001 green 61-9681.5 61-9671.5 61-9642.5 0,001 orange 61-9681.3 61-9671.3 61-9642.3 0,001 red 61-9681.2 61-9671.2 61-9642.2 0,001 smoked 61-9642.1 0,001 yellow 61-9681.4 61-9671.4 61-9642.4 0,001 matt (not for film in- sert and led) flat translucent/translu- cent white 61-9781.9 61-9771.9 0,001 matt (not for film in- sert and illumina- tion) flat opaque/translucent black 61-9781.0 61-9771.0 0,001 grey 61-9781.8 61-9771.8 0,001 lens metal with window shape lens colour 25 mm dia. part no. e lens metal with window matt flat aluminium anodized natural 61-9841.8a 0,002 lens metal shape lens colour 25 mm dia. part no. e lens metal matt flat aluminium anodized black 61-9841.0 0,002 blue 61-9841.6 0,002 green 61-9841.5 0,002 natural 61-9841.8 0,002 red 61-9841.2 0,002 yellow 61-9841.4 0,002 mushroom-head cap mushroom colour 32 mm dia. part no. e mushroom-head cap plastic opaque black 61-9593.0 0,004 green 61-9593.5 0,004 red 61-9593.2 0,004 yellow 61-9593.4 0,004 keylock front bezel a 18 x 24 mm part no. b 24 x 24 mm part no. 18 mm dia. part no. b 18 x 18 mm part no. e keylock front bezel 61-9230.0 61-9250.0 61-9210.0 61-9220.0 0,001 61-9250.0 not for flush mounting
accessories 61 125 01.2000 6 1 for lens round, 61-9642... for selector switch square front lever colour colour of bar part no. e lever with marking dot and transparent bar black black, opaque 52-928.0 0,001 blue 52-928.60 0,001 green 52-928.50 0,001 orange 52-928.30 0,001 red 52-928.20 0,001 white, opaque 52-928.9 0,001 yellow 52-928.40 0,001 grey blue 52-929.60 0,001 green 52-929.50 0,001 grey, opaque 52-929.8 0,001 orange 52-929.30 0,001 red 52-929.20 0,001 white, opaque 52-929.9 0,001 yellow 52-929.40 0,001 lever for flush mounting colour colour of bar part no. e lever for flush mounting with marking dot and transparent bar black black, opaque 61-9028.0 0,001 blue 61-9028.60 0,001 green 61-9028.50 0,001 orange 61-9028.30 0,001 red 61-9028.20 0,001 white, opaque 61-9028.9 0,001 yellow 61-9028.40 0,001 grey blue 61-9029.60 0,001 green 61-9029.50 0,001 grey, opaque 61-9029.8 0,001 orange 61-9029.30 0,001 red 61-9029.20 0,001 white, opaque 61-9029.9 0,001 yellow 61-9029.40 0,001 marking plate front shape marking plate colour part no. e marking plate clear, of plastic, can be hot pressed round transparent clear 61-9707.7 0,001 front bezel material colour b 24 x 24 mm part no. b 26 x 26 mm part no. e front bezel plastic black 52-950.0 52-952.0 0,001
accessories 61 126 01.2000 for actuator 24 mm dia. for actuator 24 mm dia. technical drawing as of page 140 front bezel-set for flush mounting use material colour a 24 x 30 mm part no. b 24 x 24 mm part no. ?25mm part no. e front bezel-set for flush mounting illuminated pushbutton/indi- cator aluminium anodized natural 61-9933.0 0,006 black 61-9933.1 0,007 plastic aluminium plated 61-9931.4 61-9930.4 0,007 black 61-9931.0 61-9930.0 61-9933.10 0,006 keylock switch aluminium anodized natural 61-9932.0 0,007 black 61-9932.1 0,007 plastic aluminium plated 61-9931.4 61-9930.4 0,007 black 61-9931.0 61-9930.0 61-9932.10 0,006 selector switch aluminium anodized natural 61-9932.0 0,006 black 61-9932.1 0,007 plastic 61-9936.0 61-9932.10 0,007 front ring material colour part no. e front ring aluminium anodized black 61-9600.0 0,003 natural 61-9600.1 0,003 protective front membrane cap material colour part no. e protective front membrane cap silicone nature transparent 61-9926.7 0,001 protective cover a 18 x 24 mm part no. b 18 x 18 mm part no. b 24 x 24 mm part no. technical drawing e protective cover hinged, transparent, with means for sealing 51-925 15 0,005 61-9920.0 16 0,006 51-920 14 0,005 protective front membrane cap for flush mounting material colour part no. e protective front membrane cap for flush mounting for front bezel-set for flush mounting silicone nature transparent 84-9103.7 0,001
accessories 61 127 01.2000 6 1 mounting dimensions as of page 145 mounting dimensions as of page 145 protective cover for flush mounting a 24 x 30 mm part no. b 24 x 24 mm part no. e protective cover for flush mounting hinged, transparent, with means for sealing 61-9922.0 61-9921.0 0,006 blind plug projecting colour a 18 x 24 mm part no. b 24 x 24 mm part no. 18 mm dia. part no. b 18 x 18 mm part no. mounting dimension e blind plug projecting for mounting hole 16 mm dia. black 51-947.0 61-9450.0 51-949.0 51-948.0 1 0,003 blind plug flat colour a 24 x 30 mm part no. b 24 x 24 mm part no. 28 mm dia. part no. mounting dimension e blind plug flat for mounting hole 21 x 21 mm black 61-9451.0 3 0,006 for mounting hole 21 x 27 mm black 61-9452.0 3 0,006 for mounting hole 22.5 mm dia. black 704.960.7 3 0,006
accessories 61 128 01.2000 description see page 109 circuit drawing as of page 150 components layouts as of page 146, circuit drawing as of page 150 emc key protection cap part no. e emc key protection cap plastic black, for lock type dom 31-985.0 spare key part no. e spare key for emergency stop switch with key to release, lock type kaba standard lock 1001, other lock numbers on request 14-987.1001 0,006 for keylock switch, lock type dom standard lock 311, other lock numbers on request 31-989.311 0,006 master key part no. e master key for lock numbers 311-445 31-989.300 0,006 at back lamp element part no. circuit drawing e lamp element with screw terminal 61-8006.01 1 0,005 diode element number of diodes part no. circuit drawing components layout e diode element with soldering-/plug-in terminal 1 61-8101.02 20 1 0,007 2 61-8102.02 21 2 0,008
accessories 61 129 01.2000 6 1 switching system: sa = snap-action switching element, t = slow-make switching element connection method: sch = screw terminal, st/pt = soldering-/plug-in terminal contacts: nc = normally closed, no = normally open components layouts as of page 146, circuit drawing as of page 150 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions diode (1n 4007) switching system contacts connection method material of contacts part no. circuit drawing components layout e switching element for illumi- nated-/pushbutton, keylock-/ selector switch 2 positions with lamp terminal, max. 250 vac/6a - sa 1nc st/pt gold/silver 61-8440.22 23 3 0,007 silver 61-8440.12 23 3 0,007 1nc + 1no st/pt gold/silver 61-8470.22 31 15 0,007 silver 61-8470.12 31 15 0,007 1nc + 2no st/pt gold/silver 61-8490.22 33 16 0,007 silver 61-8490.12 33 16 0,007 1no st/pt gold/silver 61-8410.22 28 12 0,007 silver 61-8410.12 28 12 0,007 2nc st/pt gold/silver 61-8450.22 25 4 0,007 silver 61-8450.12 25 4 0,007 2nc + 1no st/pt gold/silver 61-8480.22 32 6 0,007 silver 61-8480.12 32 6 0,007 2no st/pt gold/silver 61-8420.22 35 13 0,007 silver 61-8420.12 35 - 0,007 3nc st/pt gold/silver 61-8460.22 26 5 0,007 silver 61-8460.12 26 5 0,007 3no st/pt gold/silver 61-8430.22 36 14 0,007 silver 61-8430.12 36 14 0,007 t 1nc sch silver 61-8640.11 22 - 0,008 1no sch silver 61-8610.11 28 13 0,008 2 sa 1no + 2d st/pt silver 61-8212.12 29 17 0,007 1no + 2d st/pt gold/silver 61-8212.22 29 17 0,007 with lamp terminal, max. 42 vac/dc/100 ma - t 1nc st/pt gold 61-8640.37 23 10 0,008 1nc + 1no st/pt gold 61-8670.37 31 9 0,008 1no st/pt gold 61-8610.37 28 7 0,008 2nc st/pt gold 61-8650.37 25 11 0,008 2no st/pt gold 61-8620.37 35 8 0,008 with lamp terminal, max.250 vac/5a - t 1nc st/pt silver 61-8640.17 23 10 0,008 1nc + 1no st/pt silver 61-8670.17 31 9 0,008 1no st/pt silver 61-8610.17 28 7 0,008 2nc st/pt silver 61-8650.17 25 11 0,008 2no st/pt silver 61-8620.17 35 8 0,008 without lamp terminal, max. 250 vac/6 a - t 1nc sch silver 61-8645.11 22 - 0,008 1nc + 1no sch silver 61-8675.11 30 - 0,008 1no sch silver 61-8615.11 27 - 0,008 2nc sch silver 61-8655.11 24 - 0,008 2no sch silver 61-8625.11 34 - 0,008
accessories 61 130 01.2000 switching system: t = slow-make switching element connection method: sch = screw terminal, st/pt = soldering-/plug-in terminal contacts: nc = normally closed, no = normally open components layouts as of page 146, circuit drawing as of page 150 switching system: sa = snap-action switching element, t = slow-make switching element connection method: sch = screw terminal, st/pt = soldering-/plug-in terminal contacts: nc = normally closed, no = normally open components layouts as of page 146, circuit drawing as of page 150 switching element for emergency stop switch switching system contacts connection method material of contacts part no. circuit drawing components layout e switching element for emergency stop switch max. 250 vac/5a t 1nc st/pt silver 61-8745.17 37 19 0,008 1nc + 1no st/pt silver 61-8775.17 39 18 0,008 2nc st/pt silver 61-8755.17 38 20 0,008 max. 250 vac/6a t 1nc sch silver 61-8745.11 37 - 0,008 1nc + 1no sch silver 61-8775.11 39 - 0,008 2nc sch silver 61-8755.11 38 - 0,008 max. 42 vac/dc/100 ma t 1nc st/pt gold 61-8745.37 37 19 0,008 1nc + 1no st/pt gold 61-8775.37 39 18 0,008 2nc st/pt gold 61-8755.37 38 20 0,008 switching element for keylock-/selector switch 3 positions switching system contacts connection method material of contacts part no. circuit drawing components layout e switching element for keylock-/ selector switch 3 positions with lamp terminal, max. 250 vac/ 6a sa 1nc + 1no st/pt gold/silver 61-8574.22 31 23 0,008 silver 61-8574.12 31 23 0,008 2nc st/pt gold/silver 61-8550.22 25 21 0,008 silver 61-8550.12 25 21 0,008 2no st/pt gold/silver 61-8520.22 35 22 0,008 silver 61-8520.12 35 22 0,008 with lamp terminal, max. 42 vac/ dc/100 ma t 1nc + 1no st/pt gold 61-8770.37 31 24 0,008 2nc st/pt gold 61-8750.37 25 26 0,008 2no st/pt gold 61-8720.37 35 25 0,008 with lamp terminal, max.250 vac/ 5a t 1nc + 1no st/pt silver 61-8770.17 31 24 0,008 2nc st/pt silver 61-8750.17 25 26 0,008 2no st/pt silver 61-8720.17 35 25 0,008 without lamp terminal, max. 250 vac/6 a t 1nc + 1no sch silver 61-8775.11 31 - 0,008 2nc sch silver 61-8755.11 24 - 0,008 2no sch silver 61-8725.11 35 - 0,008
accessories 61 131 01.2000 6 1 connection method: st = soldering terminal typical applications see page 151 circuit drawing as of page 150 for plug-in terminal components layouts as of page 146 flasher element operation voltage connection method part no. e flasher element 12 vac/dc - 28 vac/dc st 61-8000.05 pcb plug-in base for pin orientation part no. components layout e pcb plug-in base 13.1 mm dia. x 12.8 mm indicator complete axial 61-9820.1 27 0,002 15 mm x 23 mm x 9.4 mm slow-make switching element axial 61-9823 29 0,002 17.7 mm x 23.6 mm x 10.9 mm snap-action switching element axial 61-9821.1 28 0,003 multi-plug housing part no. e multi-plug housing for snap-action switching element, max. 6 connections possible 61-9830 0,002 cable shoe connection method part no. e cable shoe plug in terminal 2,8 x 0,5 mm 31-946 0,001 plug-in terminal 2,8 x 0,5 mm for multi-plug housing 51-943.1 0,001
accessories 61 132 01.2000 terminal cover use part no. e terminal cover for indicator element 61-9831.2 0,001 for snap-action switching element 61-9830.2 0,002 for illumination incandescent lamp voltage/current part no. e incandescent lamp base mg t 1 3/4 6 ac/dc/125 ma 10-1306.1349 (41-963.0) 0,001 6.3 ac/dc/200 ma 10-1307.1369 (31-963.0) 0,001 12 ac/dc/75 ma 10-1309.1309 (41-963.1) 0,001 14 ac/dc/80 ma 10-1310.1319 (31-963.1) 0,001 18 ac/dc/40 ma 10-1311.1249 (41-963.2) 0,001 24 ac/dc/35 ma 10-1312.1229 (41-963.3) 0,001 28 ac/dc/30 ma 10-1313.1209 (41-963.4) 0,001 28 ac/dc/40 ma 10-1313.1249 (31-963.2) 0,001 36 ac/dc/20 ma 10-1316.1179 (41-963.36) 0,001 36 ac/dc/30 ma 10-1316.1209 (31-963.5) 0,001 48 ac/dc/20 ma 10-1319.1179 (41-963.5) 0,001 48 ac/dc/25 ma 10-1319.1199 (31-963.3) 0,001 60 ac/dc/20 ma 10-1320.1179 (31-963.4) 0,001
accessories 61 133 01.2000 6 1 for lamp voltage reduction wire in accordance with local electrical safety regulations. for lamp voltage reduction wire in accordance with local electrical safety regulations. led number of chips voltage/current colour part no. e led basemgt13/4 6 chips 6 vdc/45 ma green 10-5306.3255 (31-968.05) 0,001 red 10-5306.3252 (31-968.02) 0,001 yellow 10-5306.3254 (31-968.04) 0,001 12 vdc/30 ma green 10-5309.3205 (31-968.15) 0,001 red 10-5309.3202 (31-968.12) 0,001 yellow 10-5309.3204 (31-968.14) 0,001 24 vac/dc/12.5 ma green 10-5312.1115 (22-996.51) 0,001 red 10-5312.1112 (22-996.21) 0,001 yellow 10-5312.1114 (22-996.41) 0,001 24 vdc/14 ma green 10-5312.3135 (31-968.25) 0,001 red 10-5312.3132 (31-968.22) 0,001 yellow 10-5312.3134 (31-968.24) 0,001 28 vac/dc/12.5 ma green 10-5313.1115 (22-997.51) 0,001 red 10-5313.1112 (22-997.21) 0,001 yellow 10-5313.1114 (22-997.41) 0,001 28 vdc/14 ma green 10-5313.3135 (22-997.5) 0,001 red 10-5313.3132 (22-997.2) 0,001 yellow 10-5313.3134 (22-997.4) 0,001 48 vdc/12 ma green 10-5319.3105 (31-968.45) 0,001 red 10-5319.3102 (31-968.42) 0,001 yellow 10-5319.3104 (31-968.44 0,001 8 chips 6 vdc/48 ma green 10-6306.3265 (61-994.5) 0,001 red 10-6306.3262 (61-994.2) 0,001 yellow 10-6306.3264 (61-994.4) 0,001 12 vdc/24 ma green 10-6309.3185 (61-995.5) 0,001 red 10-6309.3182 (61-995.2) 0,001 yellow 10-6309.3184 (61-995.4) 0,001 24 vdc/12 ma green 10-6312.3105 (61-996.5) 0,001 red 10-6312.3102 (61-996.2) 0,001 yellow 10-6312.3104 (61-996.4) 0,001 28 vdc/12 ma green 10-6313.3105 (96-997.5) 0,001 red 10-6313.3102 (61-997.2) 0,001 yellow 10-6313.3104 (61-997.4) 0,001 1 chip 24 vdc/14 ma white 10-2312.3139 0,001 28 vdc/14 ma white 10-2313.3139 0,001 capacitor value part no. e capacitor use with 60 vac/20 ma, 50 hz lamp voltage 230 vac/0.27 m f 02-917.0 0,004 series resistor value part no. e series resistor use with 60 vac/20 ma lamp rating 110 v/2.7 kohm 02-904.0 0,003 125 v/3.3 kohm 02-904.1 0,003 145 v/4.7 kohm 02-904.3 0,003 230-240 v/10 kohm 02-904.7 0,003
accessories 61 134 01.2000 for fitting with series resistors and capacitors wire in accordance with local electrical safety regulations. terminal plate empty no. of spaces part no. e terminal plate empty 5 spaces 02-912.1 0,025 10 spaces 02-912.2 0,045 15 spaces 02-912.3 0,090 20 spaces 02-912.4 0,095 terminal plate with capacitor value no. of components part no. e terminal plate with capacitor use with 60 vac/20 ma lamp rating 0,27 m f/230 vac/60 vac 5 spaces 02-914.10 0,045 10 spaces 02-914.20 0,090 15 spaces 02-914.30 0,135 20 spaces 02-914.40 0,180 terminal plate with series resistor value no. of components part no. e terminal plate with series resistor use with 60 vac/20 ma lamp rating 2.7 kohm/110/60 v 5 spaces 02-913.10 0,040 10 spaces 02-913.20 0,075 15 spaces 02-913.30 0,115 20 spaces 02-913.40 0,155 3.3 kohm/125/60 v 5 spaces 02-913.11 0,040 10 spaces 02-913.21 0,075 15 spaces 02-913.31 0,115 20 spaces 02-913.41 0,155 10 kohm/230-240/60 v 5 spaces 02-913.17 0,040 10 spaces 02-913.27 0,075 15 spaces 02-913.37 0,115 20 spaces 02-913.47 0,155 for emergency stop switch label for emergency stop switch marking 43 mm dia. part no. e label for emergency stop switch 43 mm dia., yellow arret durgence 61-9970.3 0,002 emergency stop 61-9970.2 0,002 not-aus 61-9970.1 0,002 without marking 61-9970.0 0,002 protective shroud for emergency stop switch part no. e protective shroud for emergency stop switch aluminium anodized, yellow 61-9965
accessories 61 135 01.2000 6 1 for 16 mm pushbuttons in mounting hole 22.5 mm dia. enclosure for emergency stop switch part no. e enclosure for emergency stop switch with mounting hole size 16 mm dia. colour ral 1004. dimensions: 65 mm long, 65 mm wide, 57 mm high front protection ip 65 61-9480.4 0,079 cable gland pg11 part no. cable gland pg11 61-9481.8 assembling anti-twisting ring part no. e anti-twisting ring for key- and selector switch 51-910.0 0,002 reducing ring part no. e reducing ring only for use of front dimension: 24 x 24 mm/24 mm dia. 61-9960 0,003 tool-set part no. e tool-set consists of lens remover, lamp remover, mounting tool, dismantling tool k61-999.100 lens remover use part no. e lens remover for 24 x 24 mm, 25 mm dia. front and overhanging lenses 61-9730.0 0,011 for standard lenses 02-905 0,011
accessories 61 136 01.2000 for dismantling of lens and lensholder lamp/led remover part no. e lamp/led remover 61-9740.0 0,003 dismantling tool for lens part no. e dismantling tool for standard lens 51-938 0,027 dismantling tool for lens for flush mounting 61-9832 0,024 dismantling tool for switching element part no. e dismantling tool for switching element 61-9711.0 0,004 mounting tool part no. e mounting tool for tightening (or loosening) fixing nuts 01-907 0,020 cable shoe remover part no. e cable shoe remover for removing the connector from the multi-plug housing 51-943.9 0,001
technical data 61 137 01.2000 6 1 switching system self- cleaning, double-break, snap-action switching elements (con- tact gap 2 x 0.5 mm). the elements can be supplied with the following choice of switching functions: for illuminated pushbutton or switch actuator with 2 positions: max. 3 normally open contacts, max. 3 normally closed contacts or com- bined switch actuator with 3 positions: max. 2 normally open contacts, max. 2 normally closed contacts or combined the switching element can be easily snapped to or dismantled from the actuator. material actuator case polyetherimide pei, self-extinguishing front bezel polyetherimide pei and chromium plated front ring of aluminium lenses polymethylmethacrylat pmma, polycarbonate pc, aluminium (mushroom head cap: polyamide pa) material of contacts gold-plated silver or silver switching element diallyl phthalate dap, self-extinguishing, polysulfone psu mechanical characteristics actuating force measured at the lens of the illuminated pushbutton: 2.7-10 n, depending on the number of switching elements actuating torque measured at the lever or key of the selector-or keylock switch: 2.5 - 10 ncm, depending on the number of switching elements actuating travel illuminated pushbutton :3 mm switch actuator with 2 positions: 1 x ca. 42 deflection momentary action 1 x ca. 90 deflection maintained action switch actuator with 3 positions: 2 x ca. 42 deflection momentary action 2 x ca. 90 deflection maintained action ambient air temperature -25c to +55c for indicators and illuminated pushbuttons mounted as a block , make sure the heat can escape freely (as per din iec 68-) connection method universal terminal (soldering-/plug-in terminal): max. wire diameter: 2 of 1 mm max. wire cross-section of stranded cable: 1 x 0.75 mm 2 solder- ing-/plug-in terminal: 2.8 x 0.5 mm actuator with snap-action switching element degree of protection indicator, illuminated pushbutton, emercency stop switch, selector- and keylock switch: front ip 65 switching element ip 40 soldering terminal ip 20 mechanical life as per iec 512-5-6 momentary action 2 mio. cycles of operation maintained action 1 mio. cycles of operation keylock switch 50000 cycles of operation selector switch 100000 cycles of operation rebound time <= 5ms resistance to shock (single impacts, semi-sinusoidal) 50 g, 11 ms as per iec 512-4-3, iec 68-2-27 resistance to vibration (sinusoidal) 10 g, at 10- 2000- 10 hz, amplitude 0.75 mm as per iec 512-4-4, iec 68-2-6 storage temperature -40c to + 85c (as per din iec 68-) electrical characteristics continuous thermal current lth 2 5a the maximum current in continuous operation and at ambient tem- perature not exceeding the quoted maximum values. electric strength as per vde 0630 (iec 512-2-11) 2500 vac, 50 hz, 1 min between all terminals and earth electrostatic breakdown value >= 11 kv (keylock switch) protection class ii rated current 6a rated voltage 250 vac/vdc switch rating gold-/silver contact: min. 5 vac/10 ma max. 250 vac/6 a silver contact: min. 20 vac/500 ma max. 250 vac/6 a switch rating ac, cos. j 0,7: rated service voltage 250 vac 125 vac 110 vac rated service current 2 a 3 a 3 a switch rating dc, l:r=30 ms: rated service voltage: 220 110 60 24 vdc rated service current resistive: 0.5 0.7 2.0 6.0 a rated service current l:r=30ms: 0.15 0.3 0.7 2.0 a volume resistance starting value (initial) for: gold-/silver contact <= 50 m w as per iec 512-2-test 4 silver contact <= 100 m w as per iec 512-2-test 5
technical data 61 138 01.2000 rules iec 1058 en 61 058 approvals - sev 250 vac/6 a - csa 300 vac - ur 250 vac/6 a - vde 250 vac/6 a - german lloyd switching system self-cleaning, double-break, snap-action switching elements (con- tact gap 2 x 1.5 mm). the elements can be supplied with the following choice of switching functions: for illuminated pushbutton or switch actuator with 2 positions: max. 2 normally open contacts, max. 2 normally closed contacts or combined for switch actuator with 3 positions: max. 2 normally open contacts, max.2 normally closed contacts or combined the switching element can be easily snapped to or dismantled from the actuator. material actuator case polyetherimide pei, self-extinguishing front bezel polyetherimide pei and chromium plated front ring of aluminium lenses polymethylmethacrylat pmma, polycarbonate pc, aluminium (mushroom head cap: polyamide pa) material of contacts gold (low level), silver switching element polyamide pa, polysulfone psu mechanical characteristics actuating force measured at the lens of the illuminated pushbutton: 3.5-20 n, depending on the number of switching elements measured at the mushroom head cap of the emergency stop switch: max. 65 n actuating torque measured at the lever or key of the selector-or keylock switch: 4-16 ncm, depending on the number of switching elements emergency stop switch: 15 ncm actuator with slow-make switching element actuating travel illuminated pushbutton :3 mm emergency stop switch:10 mm switch actuator with 2 positions: 1 x ca. 42 deflection momentary action 1 x ca. 90 deflection maintained action switch actuator with 3 positions: 2 x ca. 42 deflection momentary action 2 x ca. 90 deflection maintained action ambient air temperature -25c to +55c for indicators and illuminated pushbuttons mounted as a block , make sure the heat can escape freely (as per din iec 68-) connection method universal terminal (soldering-/plug-in terminal): max. wire diameter: 2 of 1 mm max. wire cross-section of stranded cable: 1 x 0.75 mm 2 soldering-/plug-in terminal: 2.8 x 0.5 mm screw terminal: max. wire cross-section of stranded cable: 1 x 1 mm 2 degree of polution 3 degree of protection indicator, illuminated pushbutton, emercency stop switch, selector- and keylock switch: front ip 65 switching element ip 40 screw terminal ip 20 as per vde 0106 teil 100 mechanical life as per iec 512-5-6 momentary action 2 mio. cycles of operation maintained action 1 mio. cycles of operation keylock switch 50000 cycles of operation selector switch 100000 cycles of operation emergency stop switch 50000 cycles of operation rebound time <= 2 ms resistance to shock (single impacts, semi-sinusoidal) 50 g, 11 ms as per iec 512-4-3, iec 68-2-27 resistance to vibration (sinusoidal) 10 g, at 10- 2000- 10 hz, amplitude 0.75 mm as per iec 512-4-4, iec 68-2-6 storage temperature -40c to + 85c (as per din iec 68-) electrical characteristics continuous thermal current lth 2 universal terminal 5 a screw terminal 10 a the maximum current in continuous operation and at ambient tem- perature not exceeding the quoted maximum values. electric strength as per vde 0630 (iec 512-2-11) 4000 vac, 50 hz, 1 between all terminals and earth electrical life switching element of emergency stop switch 6050 cycles of oper- ation
technical data 61 139 01.2000 6 1 electrostatic breakdown value >= 11 kv (keylock switch) max. permissible rated current 10 a gl over voltage category iii protection class ii rated current 6a rated voltage 300 v switch rating gold contact (universal terminal, low level): min. 100 m v/10 m a max. 42 vac/100 ma; silver contact (universal terminal): min. 20 vac/10 ma max. 250 vac/5 a silver contact (screw terminal): min. 20 vac/10 ma max. 250 vac/6 a switch rating ac: rated service voltage 250 120 60 24 vac rated service current ac 13 3 a 5 a 6 a 6 a rated service current ac 14* 2 a 3 a 4 a 5 a rated service current ac 15** 2 a *only for emergency stop switch with universal terminal **only for emergency stop switch with screw terminal switch rating dc : rated service voltage: 240 110 60 24 vdc rated service current resistive: 0,5 0,7 2,0 6,0 a rated service current l:r=30 ms: 0.2 0.4 1.0 2.0 a volume resistance starting value (initial) for: gold contact <= 50 m w as per iec 512-2-test 4 silver contact <= 50 m w as per iec 512-2-test 5 rules iec 947-5-1 en 60 947 approvals - sev 250 vac -csa -ul -vde material actuator case polyetherimide pei, self-extinguishing lenses polymetylmethacrylat pmma, polycarbonate pc mechanical characteristics ambient air temperature 0c to + 45c (as per din iec 68-) connection method soldering terminal 2.8 x 0.8 mm actuator with flasher element electrical characteristics flashing frequency 1 hz 0.25 hz illumination incandescent lamp: 14 v, 80 ma or 28 v, 40 ma multi-led: 12 v, 25 ma or 24 v, 12.5 ma making cycle 1:1 operating voltage ac or dc 12 - 10% or 28 v + 10%
technical drawing, dimension, layout 61 140 01.2000 1 indicator complete page 111 2 indicator-/flasher-actuator page 111 3 illuminated-/pushbutton actuator page 112 technical drawing
technical drawing, dimension, layout 61 141 01.2000 6 1 4 emergency stop switch actuator foolproof page 112 5 pushbutton actuator with mushroom-head cap page 113
technical drawing, dimension, layout 61 142 01.2000 6 keylock switch actuator 2 positions, keylock switch actuator 3 positions page 113, 114 7 selector switch actuator 2 positions, selector switch actuator 3 positions page 115, 116 8 indicator complete for flush mounting page 117
technical drawing, dimension, layout 61 143 01.2000 6 1 9 indicator-/flasher-actuator for flush mounting page 117 10 illuminated-/pushbutton actuator for flush mounting page 118 11 mushroom pushbutton actuator for flush mounting page 118
technical drawing, dimension, layout 61 144 01.2000 12 keylock switch actuator with 2 positions for flush mounting, keylock switch actuator 3 positions for flush mounting page 119, 120 13 selector switch actuator 2 positions for flush mounting, selector switch actuator 3 positions for flush mounting page 121, 122 14 protective cover page 126 15 protective cover page 126
technical drawing, dimension, layout 61 145 01.2000 6 1 16 protective cover page 126 1 indicator complete, indicator-/flasher-actuator, illuminated-/pushbutton actuator, keylock switch actuator 2 positions, keylock switch actuator 3 positions, selector switch actuator 2 positions, selector switch actuator 3 positions, blind plug projecting page 111, 112, 113, 114, 115, 116, 127 2 emergency stop switch actuator foolproof, pushbutton actuator with mushroom-head cap, mushroom pushbutton actuator for flush mounting page 112, 113 3 indicator complete for flush mounting, indicator-/flusher-actuator for flush mounting, illuminated-/pushbutton actuator for flush mounting, keylock switch actuator with 2 positions for flush mounting, keylock switch actuator 3 positions for flush mounting, selector switch actuator 2 positions for flush mounting, selector switch actuator 3 positions for flush mounting, blind plug flat page 117,118,119,120, 121, 122, 127 mounting dimension
technical drawing, dimension, layout 61 146 01.2000 1 diode element page 128 2 diode element page 128 3 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 4 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 5 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 6 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 7 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 8 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 9 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 components layouts
technical drawing, dimension, layout 61 147 01.2000 6 1 10 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 11 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 12 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 13 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 14 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 15 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 16 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 17 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 18 switching element for emergency stop switch page 130
technical drawing, dimension, layout 61 148 01.2000 19 switching element for emergency stop switch page 130 20 switching element for emergency stop switch page 130 21 switching element for keylock-/selector switch 3 positions page 130 22 switching element for keylock-/selector switch 3 positions page 130 23 switching element for keylock-/selector switch 3 positions page 130 24 switching element for keylock-/selector switch 3 positions page 130 25 switching element for keylock-/selector switch 3 positions page 130 26 switching element for keylock-/selector switch 3 positions page 130 27 pcb plug-in base page 131
technical drawing, dimension, layout 61 149 01.2000 6 1 28 pcb plug-in base page 131 29 pcb plug-in base page 131
circuit drawing 61 150 01.2000 circuit drawing 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 circuit drawing
typical applications 61 151 01.2000 6 1 with indicators and illuminated pushbuttons equipped with diodes, the user is able to perform a lamp check or wire an alarm circuit simply with a considerable saving of space.
typical applications 61 152 01.2000 flasher element
marking 61 153 01.2000 6 1 1. engraving typefaces in addition to the most commonly used world languages (see din 1451) with close spacing, the following typefaces are availa- ble: scandinavian, slavian, greek, rus- sian. coloured filling of engraving specify whether engraving should be on the diffuser, or on the lens. specify the infill colour, charcter height and the text or symbol orientation. symbols a list of the symbols available can be sup- plied on request. 2. hot stamping for large batches it is worth while to have the lettering produced by hot stamping. typefaces for letters and figures, typefaces with 2,5 mm, 3 mm and 4 mm are available. symbols a list of the symbols available can be sup- plied on request. important! before engraving, check the position of the illuminated pushbutton or indicator (switch) lens (18 x 24) 15,3 x 21,5 mm (? 18) ? 15,8 mm (18 x 18) 15,3 x 15,3 mm horizontal mounting vertical mounting height of letters mm thickness of letters mm number of lines number of letters per line number of letters per line number of lines number of letters per line number of letters per line number of lines number of letters per line number of letters per line number of lines number of letters per line number of letters per line h s (caps) (small) (caps) (small) (caps) (small) (caps) (small) 2,5 0,4 4 11 12 5 7-8 8 3 6 6 4 7-8 8 3 0,4 3 9-10 10-11 4 6-7 7 2 5 6 3 6-7 7 4 0,5 2 7 7-8 3 4-5 5 2 3 4 2 4-5 5 5 0,5 2 5-6 6 2 3-4 4 1 2 3 2 3-4 4 6 0,6 1 4-5 5 2 3 3-4 1 2 2 1 3 3-4 8 0,6 1 3-4 3-4 1 2-3 2-3 1 2 2 1 2-3 2-3 film dimension a max. 12,7 x 18,7 mm ? 12,8 mm b 12,7 x 12,7 mm
marking 61 154 01.2000 3. film inserts instead of using engraving, the lenses can be fitted with transparent film inserts. for this purpose, though, it is advisable to use transparent lenses. when a smoked lens is used, the lettering does not become visible until the lamp lights. film dimensions 16,9x16,9 mm 11,9x11,9 mm max 11,9x18,0 mm film thickness 0.2 mm important! before engraving, check the position of the illuminated pushbutton or indicator. . (switch) ? 25 (24 x 24 mm) (24 x 30 mm) (24 x 24) marking plate for lens 19,7 mm dia. 20x20mm 18x24mm 18x18mm horizontal mounting vertical mounting height of letters thickness of letters number of lines number of letters per line number of letters per line number of lines number of letters per line number of letters per line number of lines number of letters per line number of letters per line number of lines number of letters per line number of letters per line number of lines number of letters per line number of letters per line h s (caps) (small) (caps) (small) (caps) (small) (caps) (small) (caps) (small) 2,50,43 6 6 4 9 10412 1358-9 9 48-9 9 3 0,4 2 5 6 3 7-8 9 3 10-11 11-12 4 7-8 8 3 7-8 8 40,523 424-5 527 834-5 524-5 5 50,512 324 4-525-6 624 4-524 4-5 60,612 314 414-5 523 3-414 4 8 0,6 1 2 2 1 2 2 1 3-4 3-4 1 2-3 2-3 1 2-3 2-3 film dimen- sion b 16,9 x 16,9 mm a 15,1 x 21 mm b 15,1 x 15,1 mm

▲Up To Search▲

Price & Availability of 61-12300

	To Download 61-12300 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .